+86 19112905173  877657530@qq.com

208cc engine horizontal shaft engine 170f engine

model: YS170FA   208cc engine electric: 100 – 160 USD

troy bilt 208cc engine

● What does 208cc engine mean

208cc engine is a small ohv gasoline engine, single-cylinder four-stroke, 208cc engine horsepower 7.5hp, engine displacement 208CC, engine bore 70MM, so it is also called 170F engine, 170F engine is a product after cylinder expansion based on 168F engine, so its most accessories can be used in common with 168F engine.

This type of engine is called a general purpose engine by the industry. It generally refers to a small ohv gas engine that uses gasoline as fuel and is not used on roads, and its rated horsepower is generally below 30kW. General purpose engine is mainly used as a supporting power for small agricultural machinery, garden machinery, generator sets, construction machinery, outboard machinery, etc. machine, hand-held chainsaw, trimmer, etc.

208cc engine with electric start
ducar 208cc engine review
ducar 208cc engine

Safety warning:
● Please read the 208cc engine manual carefully before use.
● Please add 208cc engine oil and gasoline before use.
● The gasoline engine must be checked and all problems solved before each start.
● Because gasoline is flammable and explosive, please turn off the engine and let it cool for at least two minutes before adding fuel.
● The engine will be high temperature during use, please do not touch.
● Noxious gases such as carbon monoxide are generated during engine operation, so please do not use the engine in a confined space.

● 208cc engine specs technical data

Engine type Single cylinder、4-stroke、overhead valve
Bore × stroke(mm) 70×54
Displacement(ml) 208
Start mode Recoil
208cc engine hp 7.5
Max. Output (HP/rpm) 7.5/3600
208cc engine speed (power) (rpm) 3600 r/min
Max. Torque (N.m/rpm) 11/2500
208cc engine top speed (torque) (rpm) 2500 r/min
Fuel designation Unleaded gasoline above 90#(GB17930-1999)
Fuel designation ≤374
Fuel tank capacity(L) 3.6
208cc engine oil capacity (L) 0.6
Dimension L×W×H(mm) 415×360×390
Net Weight(kg) 16

Kindly note: we can add electric start kit to make it become 208cc engine with electric start model, please contact our sales stuff for more details.

● 208cc engine electric start kit

208cc engine electric start kit
mtd 208cc engine diagram for control switch box

● 208cc engine structural analysis diagram

mtd 208cc engine diagram

● 208cc engine advantages


  • 1) Low noise muffler, control to reduce noise and effectively isolate sound transmission


  • 2) OHV overhead valve reduces carbon accumulation, fuel efficient and economical, and low noise

  • High-precision

    3) High-quality carburetor, ultra-low fuel consumption, ultra-long life


  • 4) Damper switch, throttle switch, oil circuit switch, personalized design, convenient and smooth operation


  • 5) High quality air filter to improve fuel efficiency


  • 6) Adopt thin hand-pulled recoil starter, light and compact

● 208cc engine steps for usage:

1. Check before starting.
● Check the 208cc engine carburetor, oil seal, bottom, etc. for oil leakage.
●Remove impurities and foreign objects around the muffler, starter, and heat sink.
●Check the appearance, whether all nuts, bolts and screws are loose and must be tightened.
● Check whether the 208cc engine oil is lower than the safety line, if the oil is lower than the safety line, the oil alarm system will stop and close.

2. Preparation before starting
1) Add engine oil
Unscrew the oil dipstick, add an appropriate amount of oil from the filler port until the specified height, and then tighten the oil dipstick; the oil used is: SAE 15 W/40 four-stroke gasoline lubricating oil
Note: 170F engine add 0.6 liters of oil, 190F engine add 1.1 liters of oil, do not add too much!!

2) Add fuel
Open the fuel tank cap and add fuel from the fuel filler port (93# unleaded gasoline is recommended) to the specified height (do not exceed the fuel tank filter).

3. Start
● Flip the fuel switch to the ON position
● When starting the gasoline engine, turn the throttle handle to the closed position; the throttle should be adjusted to the open state immediately after the machine is started
● Move the throttle handle about 1/3 from low speed to high speed
● Turn the gasoline engine switch to the ON position
● Gently pull the starter handle until you feel resistance, then pull hard and quickly, then slowly put the handle back

4. Shut down the gasoline engine
Put the throttle handle plate to the low-speed position, turn the gasoline switch to the off position, and turn off the fuel switch.

Note: It is strictly forbidden to stop quickly when the engine is running at high speed and heavy load, so as not to damage the machine parts.

5. Gasoline engine maintenance
● Close the gasoline valve at the carburetor
● Do not keep gasoline in the carburetor oil cup
● Empty the engine oil

● 208cc engine horizontal shaft engine uses

We produce various gasoline engines, such as 208CC engine, 5.5 hp petrol engine (gasoline engine 5.5 hp), 196cc engine (gasoline engine 6.5 hp), 9ph petrol engine, 10 hp horizontal shaft engine for sale, 13 hp horizontal shaft engine, 420cc OHV Gas Engine General Purpose Engine, 18 hp horizontal shaft engine for sale (460cc engine) etc., which are often used for water pumps, generators, sprayers, Vibrating rods, tillers, wheelbarrows, snow blowers, lawn mowers, mini concrete pump, trowels and other agricultural machinery, garden machinery and construction machinery provide power.

horizontal shaft engine uses

● 208cc engine parts

In addition to complete engines, we also manufacture and sell engine parts, such as 208cc engine carburetor, 208cc engine ignition coil, 208cc engine oil, 208cc engine spark plug, 208cc engine air filter, 208cc engine gas tank, 208cc engine governor etc.

troy bilt 208cc engine parts
powermore 208cc engine parts diagram
mtd 208cc engine parts

● Our service

When shipping, we will provide 208cc engine manual, we will also answer customers' questions in operation and use at any time, and assist customers in troubleshooting, such as 208cc engine troubleshooting, 208cc engine oil change, 208cc engine valve clearance, 208cc engine valve adjustment, 208cc engine Governor adjustment, 208cc engine won't start, air filter maintenance, carburetor oil leakage, etc., to provide customers with professional technical support, so that customers can enjoy high-quality after-sales service.