+86 19112905173  877657530@qq.com

Electric start 196cc engine for sale 168F engine

Model: YS168FA   196cc engine price : USD 160 (150-200)

196cc engine

196cc engine refers to a single-cylinder four-stroke air-cooled engine with an engine displacement of 196cc. Since the bore of the 196cc engine is 68mm, the 196CC engine is also called the 168F engine. It should be noted here that the 196CC engine is a 168F engine, but the 168F engine is not necessarily a 196CC engine. This is because the 168F engine is the standard model of the horizontal shaft engine, its power is 5.5-6.5 horsepower. Among them, the engine displacement corresponding to the 5.5 hp model is 163cc, you can click 5.5 hp petrol engine for more details, and the engine displacement corresponding to the 6.5 hp model is 196cc engine, which is the style introduced in this article.

The 196CC engine is air-cooled for heat dissipation, which effectively cools the heat of the engine and prolongs the service life of the engine;
Overhead valve (OHV), powerful torque, good suction and exhaust effect, full fuel combustion, low consumption;
High-quality air filter, good air filtration performance, not easy to enter dust, long service life;
Adopt thick muffler, low noise, can create a good working environment;
Special hand pull tray, plastic handle anti-slip design, thickened pull tray, durable; Small size, light weight, easy to start, easy to operate;
Electric start design, more convenient and faster;
Wide range of use, can provide power for a variety of agricultural machinery, construction machinery, garden machinery, etc. Such as pumps, generators, fishing boats, sprayers, micro tillers, cutting machines, etc.

Note:
Due to transportation reasons, the engine has not been filled with oil. When the engine is received, the test machine must be filled with engine oil.

● 196cc engine specs technical parameters

Engine type Single cylinder、4-stroke、overhead valve
Bore × stroke(mm) 68×54
Displacement(ml) 196
Start mode electric start
Max. Output (HP/rpm)(generac 196cc engine hp) 6.5/3600
196cc engine speed (r/min) 3600
Max. Torque (N.m/rpm)(196cc engine torque specs) 10/2500
Fuel designation Unleaded gasoline above 90#(GB17930-1999)
Fuel designation ≤395
Fuel tank capacity(L) 3.6
196cc engine oil capacity (L) 0.6
Dimension L×W×H(mm) 415×360×390
Net Weight(kg) 16

● 196cc engine Electric start part kits

196cc engine princess auto electric start kits accessories

● 196cc engine (168F engine) Structure diagram

generac 196cc engine

● 196cc engine advantages


  • 1) OHV structure with low energy consumption
    OHV overhead valve, excellent suction and exhaust effect, reduce carbon accumulation, high combustion efficiency and low fuel consumption. Simple equipment, high dust resistance and easier maintenance


  • 2) Hard aluminum alloy box
    High-quality aluminum alloy box, fast heat dissipation, strong and durable, and full combustion.


  • 3) Steel crankshaft
    Precision forged steel crankshaft, high temperature resistance, wear resistance, strong power. Using the rounded corner rolling process, attention to both detail and practicality.


  • 4) High quality carburetor
    Our 196cc engine carburetor is low fuel consumption, fewer breakdowns and long lasting.


  • 5) Oil alarm
    High sensitivity, when the engine oil is lower than the safety line, it will stop the machine to achieve the purpose of protecting the machine.


  • 6) Professional hand pull tray, easy to start
    Hand-pulled recoil starter, anti-low temperature treatment cable 100% nylon lint-free, soft rubber handle, start without hurting hands.

● 196cc engine for sale operate steps:

1. Check before starting.
●Check the 196cc engine carburetor, oil seal, bottom, etc. to see if there is any oil leakage.
●Remove the impurities around the 196cc engine starter, muffler, heat sink etc.
●Check the engine appearance, check all nuts, bolts and screws to see whether they are loose, if yes, tighten them.
●Check whether the engine oil is below the safety line, the oil alarm system will stop shutting down if the oil is below the safety line.

2. Preparation before starting


  • 1) Add 196cc engine oil
    Unscrew the oil dipstick, add an appropriate amount of oil from the oil filler port until the specified height, and then tighten the oil dipstick; the 196cc engine oil used is four-stroke gasoline lubricating oil.


  • 2) Add fuel Open the fuel tank cap and add fuel from the fuel filler (93# unleaded gasoline is recommended) to the specified height (do not overflow the filter layer of the fuel tank).

3. Start the engine


  • ● Turn the flame out switch to the ON position


  • ● Adjust the damper to the far left (OFF position), and adjust the oil switch to the far right (to the ON side)


  • ● Gently pull the starter handle until resistance is felt, then pull the handle hard and fast to start the gasoline engine

4. After the gasoline engine starts, adjust the damper to the far right (ON position)

5. Shut down the gasoline engine
● Move the speed adjuster to the low-speed position
● Turn the oil switch to the far left (OFF position)
● Turn the flameout switch to the OFF position

Note: It is strictly forbidden to stop quickly when running at high speed and heavy load, so as not to damage the machine parts.

● 196cc engine crankshaft optional styles

generac 196cc engine

● 196cc engine projects

Our engines have sufficient power, good performance and a wide range of applications, and are often used in agricultural and fishery machinery (such as micro-tillers, threshing machines, threshers, water pumps, sprayers, generator sets, fishing boats etc.) and construction machinery (such as road cutting Machines, grinders, vibrating rods, engineering transport vehicles, etc.) and other mechanical equipment, as power.

196cc engine projects

● About us

As a manufacturer specializing in the R&D and production of power equipment, we have been committed to the R&D and innovation of engines and related products for many years, and strive to provide the market and customers with products with reliable quality, superior performance and reasonable price.
The complete engine we produce, such as 196cc engine, 5.5 hp petrol engine, 208cc engine, 9ph petrol engine, 10 hp horizontal shaft engine for sale, 13 hp horizontal shaft engine electric start, 18 hp horizontal shaft engine for sale, 420cc engine, 460cc engine and so on,are loved by the majority of users and are used in a variety of agricultural and forestry machinery and construction machinery.

We provide engine parts, for example 196cc engine parts, like 196cc engine carburetor, 196cc engine spark plug, 196cc engine starter, 196cc engine turbo kit, 196cc engine rebuild kit and other 196cc engine performance parts etc. and other types of engine accessories, to provide our users with a solid after-sales guarantee, so that they can buy and use our products with more confidence.
We are very optimistic about the market of general engine products, and welcome you to join us as our distributor to help the development of small agricultural machinery and construction machinery with us.
Welcome to contact us for further communication.

generac 196cc engine parts

● Expand knowledge

196cc engine valve clearance

Valve clearance refers to the clearance between the valve and the valve lifter (rocker arm). In terms of engine structure, the valve is divided into intake valve and exhaust valve. Generally speaking, the intake valve clearance and exhaust valve clearance of the engine are different, and the intake valve clearance is smaller than exhaust valve clearance. 196cc engine intake and exhaust valve clearance: intake valve clearance: 0.10-0.15mm, exhaust valve clearance: 0.15-0.20mm.

Due to the wear of the valve train drive chain, it will cause changes in the valve clearance, so the valve clearance needs to be adjusted regularly. You can click on "petrol engine valve adjustment" to learn about 196cc engine valve adjustment and more about valves and valve clearance.

196cc engine valve adjustment

To adjust the valve of the 196cc engine, should remove the spark plug and pull plate; the specific operation steps are as follows:


  • 1. Remove the spark plug first


  • 2. Remove the puller


  • 3. Prepare tools for testing valve clearance.


  • 4. Loosen the nuts of the upper and lower rocker arms


  • 5. Use a 10mm feeler gauge and put it under the rocker arm.


  • 6. Tighten the nut of the rocker arm and remove the feeler gauge to complete the operation.